Product introduction of polyester microfiber white masterbatch:

Basic white masterbatch, providing pure white effect.

Product characteristics of polyester microfiber white masterbatch:

Titanium dioxide content 25-30%, whiteness value 85-88

No heavy metals

Yellowing resistance (300℃/2h ΔE<1)

Ultrafine dispersion: All product pigment particle size ≤1μm, suitable for 0.5-3D microfiber

Customized service: Parameters such as heat resistance, weather resistance, functional additives can be adjusted according to needs

Application areas of polyester microfiber white masterbatch:

Medical protective clothing base fabric

Ordinary white home textiles

Light-colored blended raw materials

Mizlion pet masterbatch breaks through the pain points of traditional masterbatch:

① Traditional masterbatch has poor spinnability.

It is difficult to spin when the amount exceeds 6%, and our company's 15% is still good for spinning.

②The coloring rate of traditional masterbatch is low.

Our company has significantly improved the coloring rate through nano-dispersion technology, and the black fiber blackness L value has exceeded 13.

③ Poor color fastness.

Traditional dark masterbatches are all matched with dyes, and have poor color fastness to washing, poor color fastness to light, poor color fastness to friction, etc., which have always been difficult to solve. Our company can achieve a higher level of 5 color fastness to washing and friction. The color fastness to light can reach a higher level of 7-8.

④ Colored silk has serious wear problems on subsequent traction porcelain parts and needle and textile certificates.

Because the fibers produced by our company's masterbatch have good smoothness and the pigment is dispersed at the nanometer level, there will be no fiber concave-convex, sawtooth, mallet, etc., which solves the wear of traditional fiber plus elastic fiber traction porcelain parts and needle and textile needle parts, and extends the service life by 5-8 times. Among them, the wear of needle and textile needle parts can be extended from the original 6-10 months to 3-8 years. Greatly reduced the loss cost of subsequent accessories.

⑤ Colored silk fiber strength has always been insufficient.

The poy colored silk fiber produced by our company has no hairy or broken silk, and the cv value is extremely low. Therefore, its strength index fully meets the strength requirements of the subsequent elasticization index for the fiber.

⑥ Serious waste of color change and cleaning.

Due to our company's nano-coating process, the pigment is fully coated with a super dispersant, and the dispersion is excellent. Therefore, when spinning and changing colors, only a small amount of base material is needed to clean it, which greatly reduces the cost of color change.

⑦ The melt pressure of color spinning rises too fast.

The reason why the melt pressure rises too fast is that the masterbatch has poor dispersion, pigment agglomeration, too many large-particle pigment components, and too much ash. Therefore, our company's nano-dispersion technology overcomes the technical difficulties of traditional masterbatch, reduces the component replacement cycle, and greatly saves the cost of board replacement.

Jiangsu Mizlion Nano Technology Co., Ltd. official website http://www.mizlion.com The company focuses on: the research and development and production of masterbatches, polyester masterbatches, nylon masterbatches, polypropylene masterbatches, polyethylene masterbatches, PLA masterbatches and functional masterbatches.